ASC2 Specifications
Maximum Data Input Rates
24bit Data to 192KS/s: AES, SPDIF, TOSLINK
24bits to 192KS/s and DSD64:10/100 Ethernet
24bits to 384KS/s and DSD64/128 (DoP):USB2 Audio
Low Level Outputs
Line Level Analog4.5Vrms with Bass Management
ST Fiber Digital Outputs2 - MPS2 Compatible (Stereo), 2 - Auxiliary
MM/MC Input
Input Sensitivity:MM: 2.5mV to 5mV; MC: 0.25mV to 0.5mV
Input Load:MM: 47K ohms; MC: 50, 100, 500, 1000
RIAA Accuracy:+/-0.25dB, 50Hz - 15kHz
THD+N:<0.01% 1kHz A-weighted
SNR:>70dB A-weighted
Line Inputs
Maximum Input:2.2 Vrms RCA
Input Impedance:10K ohms RCA
THD+N:0.003%, 1KHz
Dynamic Range:110dB, A-weighted 20Hz-20KHz
Performance
Dynamic Range:127dB A-weighted
THD+N:<0.001% 1W, 1kHz, 4 ohms
IMD (CCIF):<0.001% 1W, 18.5:19.5kHz 1:1, 4 ohms
General
Power Usage On:15W
Power Usage Off:0.0W
Power Requirement:100-120VAC, 220-240VAC 50/60 Hz
Dimensions:19" W x 12" D x 3.8" H (483 mm x 305 mm x 97 mm)
Weight:40lbs. (18.2 kg)
MPS2 Specifications
Output Section
Maximum Power Output: 1200W-2ohm, 600W-4ohm, 300W-8ohm
Minimum Load: 2 ohms
Peak Output Current: 40 amperes
Frequency Response: -3 dB 0Hz-50KHz, all loads
Output connections: 1-pair WBT Nextgen 5-way binding posts, ST Multimode Glass Fiber
Input Section
Input Connections:Stream ST Fiber
Dynamic Range Stream Input:128dB
Balanced input impedance:20Kohms
Performance
THD+N:<0.001% 1W, 1KHz, 4 ohms
IMD (CCIF):<0.001%, 1W, 18.5:19.5KHz 1:1, 4 ohms
General
Power Usage On:37W
Standby Power Usage:0.4W
Internally Set Operating Voltages:100-120VAC, 220-240VAC 50/60 Hz
Dimensions:19" W x 14" D x 3.8" H (483 mm x 356 mm x 97 mm)
Weight:45lbs. (20.5 kg)
Features and specifications are subject to improvements and changes without prior notice.